Hospital Machine Shifting & Installation
Site Feasibility Survey
Site Requirement for each medical equipment will be different and one of the critical areas in medical equipment planning, if you select the right place means half the planning is done. For Example, MRI should be planned away from moving ferromagnet objects and HT powerlines Similarly a CT Should be planned as per AERB regulations.
Our trained engineers will support customers to select suitable location in their facility for equipment installation which comply with OEM installation requirement. While selecting the location we consider the facts like equipment transportation, suitable height for each equipment, building strength, Room height etc. Which will Help trouble free upgradation of equipment in the future.
Site Planning
In a hospital medical equipment are as important as doctors and nurses which helps diagnostics and treatment. So, the planning of the site should be considering facts like workflow, Patient and User Safety, easy access to patients, future upgradation, de-Installation of equipment, power requirements, Airconditioning requirements etc. for example a CT scanner and X -Ray and a minor OT Should be planned near to Emergency Department. Similarly, USG should be ideally planned near a OPD area with an attached toilet and MRI should be planned near an outer wall were no ferromagnet object movement. While designing any hospital structure if equipment preinstallation requirements are not considered it will turn into disaster during medical equipment installation. Our Expert project managers will support customers to Plan their infrastructure according to pre-installation requirement of various medical equipment.
Professional Installation
A professionally Installed equipment will help to reduce equipment breakdown to 20-30% as compared to a machine which was installed by ignoring OEM recommendations considering only project deadlines. For Example, any electronic component which is sensitive to environmental conditions should be unpacked only when the environmental conditions are according to OEM Specification. A professional Installation means, comply the standard installation procedure as per OEM recommended sequence, method, and technics. Our OEM Trained installation crew will follow standard Installation procedures as per respective OEMs.
Professional De-Installation
De-installation is also as important as de-Installation, weather it is dismantled for scraping or re-use it should be handled professionally, if it dismantled for re-locating then it has to be dismantled and packed perfectly, old equipment also deserves better care similar to new equipment, if it is dismantled to scrap it, it should be properly updated with equipment regulating authorities like AERB, PCPNDT etc. Also, should comply with pollution control board norms of respective states.
Expert Rigging
Rigging is one of vital part in Medical equipment installation solutions, which need expertise proper planning feasibility study special equipment, trolleys, Crain etc. One need to take utmost care while rigging for equipment safety as well as people safety.
Equipment Re-Location
Equipment re-location needs meticulous planning. Because planning at dismantling location and receiving location has to be synchronised, for example a cold magnet connected with cryogen circuit to be disconnected only just hours before the loading, once it is loaded into the truck it has to reach destination without loosing a single minute, and unloading, movement positioning and connecting back to life support to be done like a war foot situation. Our experienced project Managers will ensure with various stake owners for a trouble-free relocation of equipment.
Our Clints
Our Clints